[1]刘晓妍,黄运华,张隶新,等.600/1 067 mm变轨距动车组转向架方案选型分析[J].机车电传动,2018,(06):33-37.[doi:10.13890/j.issn.1000-128x.2018.06.006]
 LIU Xiaoyan,HUANG Yunhua,ZHANG Lixin,et al.Model Selection Analysis of 600/1 067 mm Gauge Changeable Bogie[J].Electric Drive for Locomotives,2018,(06):33-37.[doi:10.13890/j.issn.1000-128x.2018.06.006]
点击复制

600/1 067 mm变轨距动车组转向架方案选型分析()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2018年06期
页码:
33-37
栏目:
变轨距技术
出版日期:
2018-11-10

文章信息/Info

Title:
Model Selection Analysis of 600/1 067 mm Gauge Changeable Bogie
文章编号:
1000-128X(2018)06-0033-05
作者:
刘晓妍1黄运华1张隶新2张丽君2许红江2
(1.西南交通大学机械工程学院,四川 成都 610031; 2.中车唐山机车车辆有限公司转向架技术中心,河北 唐山 063035)
Author(s):
LIU Xiaoyan1 HUANG Yunhua1 ZHANG Lixin2 ZHANG Lijun2 XU Hongjiang2
( 1. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031, China; 2. Bogie Technology Center, CRRC Tangshan Co., Ltd., Tangshan, Hebei 063035, China )
关键词:
600/1 067 mm轨距变轨距技术转向架选型分析
Keywords:
600/1 067 mm gauge gauge changeable technology bogie model selection analysis
分类号:
U266.2;U260.331
DOI:
10.13890/j.issn.1000-128x.2018.06.006
摘要:
通过对比国外现有变轨距技术,对600/1 067 mm变轨距转向架各零部件进行选型分析及方案确定,确定了600/1 067 mm变轨距转向架的变轨方式,进而确定了600/1 067 mm变轨距转向架各个零部件的结构方案及变轨过程。
Abstract:
By comparing the existing gauge changeable technology abroad, the type selection analysis and scheme determination of each component of 600/1 067 mm gauge changeable bogie were carried out. The rail-changing mode of 600/1 067 mm gauge changeable bogie was determined, and the structural scheme and the rail-changing process of each component of 600/1 067 mm gauge changeable bogie were determined.

参考文献/References:

[1]李芾,黄运华,傅茂海.变轨距转向架的发展及其可行性研究[J].铁道机车车辆,2002(5):1-5.
[2]CARL-PETER Zander. TALGO BT型可变轨距内燃动车[J].国外内燃动车,2001(2):1-10.
[3]GOMEZ J L Lopez,AISA J Lacasta. Talgo automatic gauge change system for freight wagons[J]. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail & Rapid Transit,2001,205(1):13-24.
[4]TOKUDA Noriaki,OKAMOTO Isao,FUJITA Toyoshi. Development of gauge change bogies[J]. QR of RTRI,2003,44(3):109-113.
[5]黄运华.基于独立旋转车轮的变轨距转向架研究[D].成都:西南交通大学,2003.
[6]黄运华.变轨距转向架国内外调研报告[R].成都:西南交通大学, 2017.
[7]瞿芳.轴类零件形位公差的选择[J].机械制造与研究,2004,33(6):68-69.
[8]中华人民共和国技术委员会,中华人民共和国铁道部. 762 mm轨距铁路机车车辆限界和建筑接近限界分类及基本尺寸:GB 188—1963[S]. 1963.
[9]何翠微.高速万向轴式动力车转向架研究及方案设计[D].成都:西南交通大学,1997.
[10]刘绍勇.重庆跨座式单轨车辆转向架[J].现代城市轨道交通,2006(1):5-9.
[11]严隽耄,傅茂海.车辆工程]M]. 3版.北京:中国铁道出版社,2007.

相似文献/References:

[1]李芾,邵亚堂,黄运华,等.国外变轨距列车及其转向架的发展与研究[J].机车电传动,2018,(03):1.[doi:10.13890/j.issn.1000-128x.2018.03.001]
 LI Fu,SHAO Yatang,HUANG Yunhua,et al.Development and Research of Foreign Gauge-changeable Train and Bogie[J].Electric Drive for Locomotives,2018,(06):1.[doi:10.13890/j.issn.1000-128x.2018.03.001]
[2]徐彬,黄志辉,舒 友,等.变轨距转向架研制与应用思考[J].机车电传动,2018,(03):14.[doi:10.13890/j.issn.1000-128x.2018.03.002]
 XU Bin,HUANG Zhihui,SHU You,et al.Development and Application Strategy of Gauge-changeable Bogies[J].Electric Drive for Locomotives,2018,(06):14.[doi:10.13890/j.issn.1000-128x.2018.03.002]
[3]黄志辉,夏朝国,胡飞飞,等.变轨距轮对轴套式花键的设计[J].机车电传动,2018,(04):1.[doi:10.13890/j.issn.1000-128x.2018.04.001]
 HUANG Zhihui,XIA Chaoguo,HU Feifei,et al.Design of Axle Sleeve Type Spline of Gauge-changeable Wheelset[J].Electric Drive for Locomotives,2018,(06):1.[doi:10.13890/j.issn.1000-128x.2018.04.001]
[4]韩光旭,周殿买,黄志辉.高速变轨距转向架轴箱轴承选型及寿命评估[J].机车电传动,2018,(04):6.[doi:10.13890/j.issn.1000-128x.2018.04.002]
 HAN Guangxu,ZHOU Dianmai,HUANG Zhihui.Type Selection and Life Assessment of High-speed Gauge-changeable Bogie Axle Box Bearing[J].Electric Drive for Locomotives,2018,(06):6.[doi:10.13890/j.issn.1000-128x.2018.04.002]
[5]邵亚堂,黄运华,张隶新,等.变轨距列车用地面变轨设施方案设计[J].机车电传动,2018,(04):10.[doi:10.13890/j.issn.1000-128x.2018.04.003]
 SHAO Yatang,HUANG Yunhua,ZHANG Lixin,et al.Scheme Design of Ground Transformation Facility for Gauge-changeable Trains[J].Electric Drive for Locomotives,2018,(06):10.[doi:10.13890/j.issn.1000-128x.2018.04.003]
[6]邹纪操,傅茂海,李朝曦,等.高速变轨距动车组转向架滑动套配合量影响研究[J].机车电传动,2018,(05):1.[doi:10.13890/j.issn.1000-128x.2018.05.001]
 ZOU Jicao,FU Maohai,LI Zhaoxi,et al.Research on the Fit Value Influence of High-speed Gauge-changeable EMUs Bogie Sleeve[J].Electric Drive for Locomotives,2018,(06):1.[doi:10.13890/j.issn.1000-128x.2018.05.001]
[7]孔瑞晨,周殿买,黄志辉,等.高速变轨距动车组转向架解锁- 锁紧装置设计[J].机车电传动,2018,(05):5.[doi:10.13890/j.issn.1000-128x.2018.05.002]
 KONG Ruichen,ZHOU Dianmai,HUANG Zhihui,et al.Design of Unlocking-locking Device for High-speed Gauge-changeable EMUs’ Bogie[J].Electric Drive for Locomotives,2018,(06):5.[doi:10.13890/j.issn.1000-128x.2018.05.002]
[8]崔红伟,黄志辉,周殿买,等.1 435/1 000 mm 变轨距转向架轮对轴箱设计[J].机车电传动,2018,(05):9.[doi:10.13890/j.issn.1000-128x.2018.05.003]
 CUI Hongwei,HUANG Zhihui,ZHOU Dianmai,et al.Design of Wheelset Axle Box for 1 435/1 000 mm Gauge-changeable Bogie[J].Electric Drive for Locomotives,2018,(06):9.[doi:10.13890/j.issn.1000-128x.2018.05.003]
[9]徐忠宣,刘晓妍,黄运华,等.1 435/1 520 mm 变轨距动车组轮对及其地面装置[J].机车电传动,2018,(06):38.[doi:10.13890/j.issn.1000-128x.2018.06.007]
 XU Zhongxuan,LIU Xiaoyan,HUANG Yunhua,et al.Design of 1 435/1 420 mm EMUs Gauge Changeable Wheelset and Its Gauge Changeable Ground Equipment[J].Electric Drive for Locomotives,2018,(06):38.[doi:10.13890/j.issn.1000-128x.2018.06.007]
[10]周殿买,黄志辉,徐彬,等.国外典型变轨距转向架轮轴间的磨耗分析[J].机车电传动,2018,(06):42.[doi:10.13890/j.issn.1000-128x.2018.06.008]
 ZHOU Dianmai,HUANG Zhihui,XU Bin,et al.Wear Analysis of Wheel Shaft in Typical Gauge Changeable Bogies Abroad[J].Electric Drive for Locomotives,2018,(06):42.[doi:10.13890/j.issn.1000-128x.2018.06.008]

备注/Memo

备注/Memo:
作者简介:刘晓妍(1993-),女,硕士研究生,研究方向为机车车辆系统动力学。
更新日期/Last Update: 2018-11-10