[1]邹建军,黄志辉. 基于SIMPACK 建模的某特种车辆动力学计算结果的后处理分析[J].机车电传动,2019,(01):1.[doi:10.13890/j.issn.1000-128x.2019.01.124]
 ZOU Jianjun,HUANG Zhihui. Post Processing Analysis of Dynamic Calculation Results of a Special Vehicle Based on SIMPACK Model[J].Electric Drive for Locomotives,2019,(01):1.[doi:10.13890/j.issn.1000-128x.2019.01.124]
点击复制

 基于SIMPACK 建模的某特种车辆动力学计算结果的后处理分析()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2019年01期
页码:
1
栏目:
研 究 开 发
出版日期:
2019-01-10

文章信息/Info

Title:
 Post Processing Analysis of Dynamic Calculation Results of a Special Vehicle Based on SIMPACK Model
作者:
 邹建军黄志辉
 (西南交通大学 牵引动力国家重点实验室,四川 成都 610031)
Author(s):
 ZOU Jianjun HUANG Zhihui
 ( State Key Laboratory of Traction Power , Southwest Jiaotong University, Chengdu,Sichuan 610031, China )
关键词:
 SIMPACK动力学指标车辆动力学滤波方法曲线通过
Keywords:
 SIMPACK dynamic index vehicle dynamic filtering method curve passing
分类号:
U270.1+1
DOI:
10.13890/j.issn.1000-128x.2019.01.124
文献标志码:
A
摘要:
 讨论在SIMPACK 后处理中常用的4 种滤波方法,并以计算曲线工况下的动力学指标为例,采用图形对比的方式,将使用4 种滤波方法得出的计算结果与未进行后处理的波形图进行图形对比,较为直观地选出了比较吻合实际结果的滤波方法。从对比结果中可以看出,采用第99.75 百分位数的结果更为可靠。研究可为今后使用SIMPACK 软件进行动力学计算结果的后处理分析时对滤波方式的选取提供参考。
Abstract:
 4 kinds of filtering methods commonly used in SIMPACK post processing were discussed. Taking the dynamic indexes calculation under curves condition as an example, the calculated results obtained by the 4 filtering methods were compared with those of the waveforms that were not processed by using the 4 filtering methods, and the filtering was more intuitively matched with the actual results. From the comparison, the result of using the 9 thousand and 975 quantile was more reliable. The research could be used for post processing analysis of dynamic calculation results by using SIMPACK software in the future, and provide reference for the selection of filtering methods.

参考文献/References:

 [1]傅秀通.专家级动力学分析软件—SIMPACK[J].CAD/CAM 与制造业信息化,2004,11(3):69-70.
[2]缪炳荣,罗仁,王哲, 等.SIMPACK 动力学分析高级教程[M].成都:西南交通大学出版社,2010.
[3]缪炳荣,肖守讷,金鼎昌.应用SIMPACK 对复杂机车多体系统建模与分析方法的研究[J].机械科学与技术,2006,25(7):813-816.
[4]陈龙,方宇,潘以成,等.基于SIMPACK 的城市轨道车辆脱轨安全性分析[J].城市轨道交通研究,2013,16(8):126-129.
[5]黄安宁,易智民,张安全.基于SIMPACK 的轨道车辆动态性能仿真分析[J].机械与电子,2013,29(3):77-80.
[6]POPP K, KAISER I, KRUSE H. System dynamics of railway vehicles and track[J]. Archive of Applied Mechanics, 2003,72(11):949.

相似文献/References:

[1]丁荣军,张志学,李红波. 轨道交通能源互联网的思考[J].机车电传动,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.01.001]
 DING Rongjun,ZHANG Zhixue,LI Hongbo. An Overview on Rail Transit Energy Internet[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.01.001]
[2]胡基贵,刘天赋. 从现代有轨电车技术的发展看中国研究方向[J].机车电传动,2016,(02):1.[doi:10.13890/j.issn.1000-128x.2016.02.001]
 Hu Jigui,Liu Tianfu. Technical Development Direction of China Modern Tramcar[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.02.001]
[3]董利芳,穆俊斌,张 闯,等. 基于均值法的地铁网络通信配置方案设计[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.106]
 DONG Lifang,MU Junbin,ZHANG Chuang,et al. Design of Metro Network Communication Configuration based on Mean Value[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.106]
[4]付 彬,罗世辉,刘晓宇,等. 带径向机构的铰接式单轴转向架独立轮对导向特点分析[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.101]
 FU Bin,LUO Shihui,LIU Xiaoyu,et al. Steering Characteristic of Independent Wheelset of Articulated Single-axle Bogie with Radial Mechanism[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.101]
[5]倪大成,应 婷,张 宇. 机车牵引主电路接地检测回路共模电压研究[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.105]
 NI Dacheng,YING Ting,ZHANG Yu. Research on Grounding-protection Equipment Common-mode Voltage of Electric Locomotive Traction Main Circuit[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.105]
[6]汤 永,李 辉,张 涛. 基于闭塞时间模型的列车追踪间隔时间研究[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.104]
 Tang Yong,Li Hui,ZHANG Tao. Research on Train Headway based on Blocking Time Model[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.104]
[7]武学良,刘银涛,郝占红. 电力机车牵引电机通风系统比较[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.103]
 WU Xueliang,LIU Yintao,HAO Zhanhong. Summarization of Electric Locomotive Traction Ventilation System[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.103]
[8]张兴宝. 地铁列车制动距离及制动减速度相关问题研究[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.107]
 ZHANG Xingbao. Research on the Related Problems of Braking Distance and Deceleration of Metro Trains[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.107]
[9]章志兵,张志学,黄 超. 机车车载谐波治理装置的研制[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.100]
 ZHANG Zhibing,ZHANG Zhixue,HUANG Chao. Development of Harmonic Restraining Devices on Locomotives[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.05.100]
[10]李 明,李明高,刘 楠,等. 超高速动车组新头型方案设计与验证[J].机车电传动,2016,(06):1.[doi:10.13890/j.issn.1000-128x.2016.06.103]
 LI Ming,LI Minggao,LIU Nan,et al. Design and Verification of New Head Type of Super High-speed EMUs[J].Electric Drive for Locomotives,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.06.103]

备注/Memo

备注/Memo:
 收稿日期:2017-05-27
基金项目:牵引动力国家重点实验室自主研究课题项目(2017TPL_T03)
作者简介:邹建军(1992-),男,硕士研究生,研究方向为车辆系统动力学。
更新日期/Last Update: 2019-01-09