[1]王 伟,郑建科,燕春光,等.基于有限元分析的地铁构架牵引拉杆座模型优化设计[J].机车电传动,2020,(02):140-143.[doi:10.13890/j.issn.1000-128x.2020.02.123]
 WANG Wei,ZHENG Jianke,YAN Chunguang,et al.Model Optimization Design of Traction Pull Rod of Subway Structure Based on Finite Element Analysis[J].Electric Drive for Locomotives,2020,(02):140-143.[doi:10.13890/j.issn.1000-128x.2020.02.123]
点击复制

基于有限元分析的地铁构架牵引拉杆座模型优化设计()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2020年02期
页码:
140-143
栏目:
城市轨道车辆
出版日期:
2020-03-10

文章信息/Info

Title:
Model Optimization Design of Traction Pull Rod of Subway Structure Based on Finite Element Analysis
文章编号:
1000-128X(2020)02-0140-04
作者:
王 伟郑建科燕春光宋兴华许 喆
(中车唐山机车车辆有限公司,河北 唐山 063035)
Author(s):
WANG Wei ZHENG Jianke YAN Chunguang SONG Xinghua XU Zhe
( CRRC Tangshan Co., Ltd., Tangshan, Hebei 063035, China )
关键词:
有限元分析地铁车辆结构优化转向架构架静强度
Keywords:
finite element analysis subway vehicle structural optimization bogie frame static strength
分类号:
U231
DOI:
10.13890/j.issn.1000-128x.2020.02.123
文献标志码:
A
摘要:
基于有限元分析软件对某种地铁车辆构架的三维模型进行了超常工况下的静强度计算,发现构架牵引拉杆座模型有较严重的结构问题,无法满足设计要求。文章基于计算结果和设计经验进行模型优化,优化后再次使用有限元分析软件进行复验计算,并进行了试验验证,使牵引拉杆座的优化方案达到预想设计效果。
Abstract:
Based on the finite element analysis software, the static strength of the three-dimensional model of a metro vehicleframe under abnormal working conditions was calculated. It was found that there were serious structural problems in the model offrame traction rod seat, which can not meet the requirements of the design. Based on the calculation results and design experience, themodel was optimized. After optimization, the finite element analysis software was used again to recheck the calculation, and the testwas carried out, which verified that the optimization scheme of the traction rod seat achieved the expected design effect.

参考文献/References:

[1] 张莎 . 一种轨道工程车转向架构架强度及模态分析 [J]. 铁道技术监督 , 2019, 47(6): 64-68.

[2] 王海腾 , 马思群 , 李健 , 等 . 机车转向架构架强度分析模型一致性校验及优化设计 [J]. 机械研究与应用 , 2019, 32(2): 96.
[3] 张向辉 , 尹博文 . 209 型转向架纵向牵引拉杆座裂纹原因及改进建议 [J]. 铁道车辆 , 2004, 42(9): 39-40.
[4] 高红义 , 张开林 , 张明晶 . 机车转向架构架拉杆座弹塑性分析及结构改进 [J]. 电力机车与城轨车辆 , 2008, 31(2): 32-36.
[5] 张锁怀 , 李永春 , 孙军帅 . 地铁车辆转向架构架有限元强度计算与分析 [J]. 机械设计与制造 , 2009(1): 45-47.
[6] 朱璐璐 . 地铁车辆转向架构架的有限元分析 [D]. 西安 : 西安科技大学 , 2016.
[7] 封全保 , 彭永明 . 200 km/h 电力机车转向架构架设计 [J]. 铁道机车车辆 , 2002( 增刊 1): 184-186.

相似文献/References:

[1]王 强.快速换轨车设计[J].机车电传动,2015,(03):45.[doi:10.13890/j.issn.1000-128x.2015.03.012]
 WANG Qiang.Design of the Rapid Rail-replacing Car[J].Electric Drive for Locomotives,2015,(02):45.[doi:10.13890/j.issn.1000-128x.2015.03.012]
[2]杨晓林,王烟平.地铁车辆辅助逆变器过流保护的原因分析及改进[J].机车电传动,2015,(03):82.[doi:10.13890/j.issn.1000-128x.2015.03.023]
[3]严志勇,曾明高,罗国永,等.地铁车辆辅助逆变器的并网控制[J].机车电传动,2015,(04):59.[doi:10.13890/j.issn.1000-128x.2015.04.016]
 YAN Zhiyong,ZENG Minggao,LUO Guoyong,et al.Parallel Control of Auxiliary Inverters for Metro Vehicle[J].Electric Drive for Locomotives,2015,(02):59.[doi:10.13890/j.issn.1000-128x.2015.04.016]
[4]张兴宝,唐家龙,李 涛.西安地铁2 号线车辆司控器级位错乱故障的原因分析及整改方案[J].机车电传动,2015,(05):84.[doi:10.13890/j.issn.1000-128x.2015.05.023]
[5]陈 燕.受电弓状态动态检测系统在成都地铁2 号线的应用[J].机车电传动,2015,(05):91.[doi:10.13890/j.issn.1000-128x.2015.05.025]
 CHEN Yan.Application of the Pantograph Dynamic Detection System in Chengdu Metro Line 2[J].Electric Drive for Locomotives,2015,(02):91.[doi:10.13890/j.issn.1000-128x.2015.05.025]
[6]刘高坤,张江,王树森,等.直线电机地铁车辆动力学性能仿真研究的新方法[J].机车电传动,2015,(02):103.[doi:10.13890/j.issn.1000-128x.2015.02.025]
 LIU Gaokun,ZHANG Jiang,WANG Shusen,et al.New Method of Dynamics Performance Simulation for Metro Vehicle with Linear Motor[J].Electric Drive for Locomotives,2015,(02):103.[doi:10.13890/j.issn.1000-128x.2015.02.025]
[7]王寿峰,由建宏.地铁车辆空气弹簧压力急升引起总风欠压开关动作的对策[J].机车电传动,2014,(06):78.[doi:10.13890/j.issn.1000-128x.2014.06.021]
 WANG Shoufeng,YOU Jianhong.Measures of Air Spring Pressure Rapid Rising Resulting in Main Air Switch Triggered for Metro Vehicle[J].Electric Drive for Locomotives,2014,(02):78.[doi:10.13890/j.issn.1000-128x.2014.06.021]
[8]张博,高世萍,王岩,等.空心电抗器磁场屏蔽效果研究[J].机车电传动,2014,(05):99.[doi:10.13890/j.issn.1000-128x.2014.05.106]
 ZHANG Bo,GAO Shiping,WANG Yan,et al.Research of Magnetic Shielding Effect of Air-core Reactor[J].Electric Drive for Locomotives,2014,(02):99.[doi:10.13890/j.issn.1000-128x.2014.05.106]
[9]江 伟,张薇琳,王伟陈.地铁车辆辅助逆变器并联供电模式分析[J].机车电传动,2015,(06):63.[doi:10.13890/j.issn.1000-128x.2015.06.017]
 JIANG Wei,ZhANG Weilin,WANG Weichen.Analysis of Parallel Operation Power Supply for Metro Vehicle Auxiliary Inverter[J].Electric Drive for Locomotives,2015,(02):63.[doi:10.13890/j.issn.1000-128x.2015.06.017]
[10]周晓明,肖华,陈超录.长沙地铁2号线车辆三大核心系统集成[J].机车电传动,2014,(04):1.[doi:10.13890/j.issn.1000-128x.2014.04.001]
 ZHOU Xiao-ming,XIAO Hua,CHEN Chao-lu.Three Core Systems Integration in Changsha Metro Line 2[J].Electric Drive for Locomotives,2014,(02):1.[doi:10.13890/j.issn.1000-128x.2014.04.001]
[11]王 伟,郑建科,燕春光,等. 基于有限元分析的地铁构架牵引拉杆座模型优化设计[J].机车电传动,2020,(02):1.[doi:10.13890/j.issn.1000-128x.2020.02.123]
 WANG Wei,ZHENG Jianke,YAN Chunguang,et al. Model Optimization Design of Traction Pull Rod of Subway Structure Based on Finite Element Ana[J].Electric Drive for Locomotives,2020,(02):1.[doi:10.13890/j.issn.1000-128x.2020.02.123]

备注/Memo

备注/Memo:
作者简介:王? 伟(1984—),女,硕士,高级工程师,主要从事铁路车辆机械系统关键技术研究。
更新日期/Last Update: 2020-03-10